SPECIAL ADVERTISING SECTION
Future issues will include showcases devoted to heavy equipment,
concrete building products and materials, retaining walls, construction
services, geotechnical products and computer software and hardware.
To be included in these showcases, please
contact Dianne Vance at (703) 295-6234.
Advanced Drainage Systems, Inc.
Ms. Tori Durliat
Director of Marketing, ADS
ADS SANI TITE® HP HIGH PERFORMANCE PIPE
Sani Tite HP, a polypropylene sewer pipe from Advanced Drainage Systems, Inc. (ADS), meets ASTM
Standards F2736 and F2764. Sani Tite HP is available in 12 to 30 in. (300 to 750 mm) dual wall and
30 to 60 in. (750 to 1,500 mm) triple-wall designs.
The pipe’s smooth exterior wall design is supported
by a corrugated structural core that provides improved stiffness and greater beam strength to minimize deflection. The pipe provides enhanced job
site durability and easier backfill installation. ADS
Sani Tite HP’s smooth interior wall incorporates a
dual-banded, extended bell and a spigot with two
gaskets for added safety. The pipe comes in standard lengths of 13 and 20 ft. The 20 ft length allows
for fewer joints, while the 13 ft length is a lightweight,
maneuverable choice for trench box installation and
tight work situations. For more information, visit our
website at www.ads-pipe.com.
Best Management Products, Inc.
53 Mt. Archer Dr.
Lyme, CT 06371
More than 50,000 SNOUTs are helping communities
comply with storm-water quality regulations and improve the sustainability of their low-impact designs.
This system reduces trash, floatables, oil, and sediment from storm-water discharges. It is also a high-performance pretreatment option for water harvesting, storm-water retention, and recharge systems.
Best Management Products (BMP)’s accessories,
such as the Stainless TrashScreen™ and Bio-Skirt®,
add flexibility and extra cleaning power. The Stainless TrashScreen is an accessory that helps to meet
full trash capture requirements for trash TMDLs. The
most popular option for the SNOUT is the Bio-Skirt®,
which reduces bacteria and dramatically increases
hydrocarbon removals, including emulsified oils and
PAHs. Full design information, CAD drawings, and
pricing can be found at bmpinc.com. All products
are made in the United States.
Collins Engineers, Inc.
123 North Wacker Drive, Suite 900
Chicago, IL 60606
Phone (24-hour service): 877-346-3234
Since 1979, Collins Engineers, Inc. has provided
engineering services in structural and transportation
analysis and design and underwater engineering.
Collins pioneered the use of professional engineer-divers in the evaluation of underwater structures.
Today, Collins is an ENR Top 500 Design Firm providing design and analysis services to the transportation, marine, land development, and construction
industries. We insist on first-hand knowledge, which
means our engineers are on the project from start
to finish, from the initial inspection to the design
of repairs, from construction administration to final
inspection. Collins provides engineering ingenuity
and solutions to complex problems and realistic,
Civil Engineering SEPTEMBER 2012